Plastic Testing Equipments

Twin Column Universal Tensile Testing Machine

Product Details:
  • Speed Range : 0.1 mm / min to 500 mm / min
  • Speed Accuracy: +1% or -1%
  • Touch Pad HMC Size : 7 inch
  • Load Counts : 20000
  • Reading Speed : 10 milliseconds
  • Displacement Resolution: 0.1 mm
  • No. of Columns: 2

Shanta Engineering Universal Testing Machines is offering Twin Column Universal Tensile Testing Machine. We are offering electro mechanical machines with digital display of load & displacement & pulley belt system for changing speeds. Tension, compression, bend and flexural tests can be performed on these machines with suitable grips and fixtures. The critical components are plated for rust prevention and durability.

Features:

Selection of different speeds by pulley belt systemFacility to mount different load cells.Facility to mount various grips/fixtures for different tests and materials like rubber, plastics, cables, leather, paper, plywood and metals


Available Models:

MODEL NO.SET-T 5000 NSET-T 10 KNSET-T 20 KNSET-T 30 KN
Max. capacity(Kg)500100020003000
Load Resolution(N) 1:10,0000.5122
Max. crosshead displacement without grips/fixtures (mm)900900900900
Diisplacement resolution (mm)0.20.20.20.2
Column clearance(mm)380380450450
Variable speed with the help of A.C.Drive5mm/min to 100mm/min or 30mm/min to 500mm/min
Variable speed with the help of A.C.Servo Drive1mm/min to 500mm/min
Machine Dimensions w x d x h in (mm )1100 x 330 x 18001100 x 330 x 18001100 x 400 x 18001100 x 400 x 1800
Power requirement for A.C. Drive0.5 HP1.0 HP2.0 HP2.0 HP
Power requirement for A.C. Servo Drive400W600W1.0KW1.0KW
Power Supply230 VAC±10%, Single Phase, 50Hz with Neutral & Earth

ESCR Test Apparatus

Product Details:
  • Max. Temperature: 500 deg cel
  • Resolution : 0.100 deg cel
  • Bath Material Outer: MS
  • Bath Material Inner: SS

ESCR Apparatus is used for determination of susceptibility of ethylene plastics to environmental stress cracking when subjected to certain conditions. Bent specimens of the plastics each having a controlled imperfection on the surface are exposed to the action of a surface active agent, oils or detergent. The proportion of the total number of specimens that crack in a given times is observed.

Features:
  • The heating system is having an RTD
  • Heater and digital temp. Controller (PID)


Details:
AccessoriesUnit


1 Blanking dle1No.
2 Nicking jig1No.
3 Bending cum transferring device1No.
4 Specimen holder10Nos.
5 Test Tubes10Nos.
6 Corks10Nos.

Izod Impact Tester

Product Details:
  • Voltage Supply: 110 V / 220 V
  • Max. Available energy: 21.68 J
  • Material: MS, SS
  • Finishing: Powder Coated

Izod Impact Tester is manufactured as per ASTM D-256. The method of determining impact strength of rigid plastics or reinforced plastics. A notched sample is generally used to determine impact strength. The test determines the amount of energy absorbed by a material during factual.


Features:

  • Sixteen characters by 2 lines back lighted LCD display
  • Four Keys
  • Angle measurement by encoder (500 ppr two output pulses)
  • Selection of hammer range (four types)
  • Programmable thickness and width of the sample
  • Selectable range of unit to display the break energy in - joules (j), joules/cm^2 (j/cm^2), Joules/metre (j/m) and pounds/square inch (psi)
  • Nonvolatile memory for storage of selected range, programmed thickness, programmed width and the selected unit for break energy
  • Release switch for the release of the hammer arm - to test the sample
  • Range change by selector switch
  • Interchangeability of impact hammers are very easy

Optional:
  • Dimension feeding facility to calculate Joules / cm 2 or Joules / m
  • Torque wrench
  • Charpy hammers
  • Notch cutter ( Manual )
  • Notch cutter ( Motorised )

Additional Information:
  • Item Code: ASTMD256

VST And HDT Apparatus

Product Details:
  • Minimum Order Quantity: 1 Unit
  • Rate of Rise of Temperature: 50 + 50 deg cel / per hr - 120 + 120 deg cel
  • Plastic Temperature rise Rate: 2 + 0.20 deg cel / per min
  • Material: MS, SS
  • Finishing: Powder Coated

Vicat Softening Temp. (ASTM D1525)performs determination of the temperature at which a standard indenter penetrates 1mm into the surface of a plastics test specimen under one of the loads specified under a uniform rate of heating.

Deflection Temperature of Plastic Under Flexural Load (As per ASTM D-648) performs determination of temp. at which an arbitrary deformation occurs when plastics are subjected to arbitrary bending loads and conditions of continually rising temperature.

Also available VST/HDT apparatus PLC BASED. As per ASTM D 1525 & ASTM D 648. Values of VST & HDT obtained through software. Graphic display & print out through PC, penetration/ Deflection Vs Temp graph & values of VST & HDT could be obtained by attaching a printer to the PC


Additional Information:
  • Item Code: ASTMD-1525

Melting Point Apparatus

Product Details:
  • Max Temperature: Upto 350 deg cel
  • Cylindrical Block Material: Aluminium
  • Finishing: Powder Coated
  • Nobes: 2

Melting Point Apparatus is fabricated using best grade raw materials. These are widely used in various industries and acknowledged for the dimensional accuracy and longer services. Melting Point Apparatus is used in estimating the melting point of chemicals, Pharmaceuticals, and Foods. This is extremely helpful to resolve the melting point of any essence. In this, the temperature is controlled by the power controller.

 

Features:

  • It is used to estimate the Melting Point of material used in chemical, pharmaceutical and food industry.
  • This is very useful to determine the melting point of any substance.
  • Consists of an aluminium cylindrical block for heating, Radial holes admit a thermometer and glass capillary.
  • Temperature is controlled by energy regulator.
  • Regulator fitted to the unit and with high low heat switch
Looking for Plastic Testing Equipments ?
© Shanta Engineering
 
Desktop Site Back to top